国产三级在线观看免费-亚洲av最新在线网址-五月天亚洲图片婷婷-国产在线国偷精品产拍

Diagnostic unit I plus User Manual_3-E

來源: 2020/9/25 11:57:20 點擊:

Diagnostic unit I plus User Manual_3-E

Page - 1 - of 8
Diagnostic Unit I plus User Manual (V2.1)
Brief
“I plus” increases to download and upload the characteristic program of MC (MC1、MC2、MC3) main board
based on original model, and saves the downloaded characteristic program of MC board into diagnostic unit I. It
has relative software which can backup downloaded characteristic programs in computers, or can upload
characteristic programs to diagnostic unit.
When do maintenance debugging on site, “I plus” is very convenient to solve many problems for long-service life
elevator projects due to characteristic program missing in main chipset, chipset damaged, or fake chipset etc…
and will not be worried about the trouble to replace main board but no chipset.
“I plus” needs to copy some parameters when replace MC board, it only takes few steps, and debugs other items:
well teach-in(AF10), rated speed(AF16), speed correction, external call scan(AF0C).
Usage Steps
 Keys and status switch operation.
“I plus” diagnostic unit appearance(Pic 1)
Here is a USB
port 
Page - 2 - of 8
 Pic 2
a. switch from normal debugging operation interface to parameter operation interface: in Pic 2, press “+”
“-” key at the same time until the first digit dot on the right light on, and diagnostic unit will switch into parameter
copy menu showed as pic 3. If it shows as pic 3, it enters into parameter operation interface.
 Pic 3
b. switch from parameter operation interface to normal debugging operation interface : In pic 3, press “+”
“-” key at the same time until the first digit dot on the right light on, the diagnostic unit back to normal debugging
status. (From pic 3 status to pic 2 status.)
c. enter into parameter operation interface as pic 3, press “+” or “-” key, can page up or down to check parameters.
“P - - 0”, “P - - 1”…… “P - - 9”. This device can save 0~9 parameters. If the display is dark, which means
the program is empty in this number, and it display light, it means the program is valid in this number.
 Sub-Menu explanations and operations for four parameters.
a. pause at “P--0” ( at 0 parameter), press “ENT” enter key, interface will switch from pic 3 to pic 4, it shows to
enter into the Number 0 parameter menu. “0-rt” : 0 means 0 parameters, “rt” is the abbreviation of return. If press
“ENT” key, the interface will switch back from pic 4 to pic 3.
 Pic 4
b. press “-” key in pic 4, will show pic 5, “0-id” shows the ID for the number 0 saved parameter (normally, it
refers to the characteristic number of elevator ). Press “ENT” key under pic 5, it will rolling display saved
parameters ID. If the display color is dark, it means no saved parameters; it is no valid to press “ENT”, no display
parameter ID.
 Pic 5
c. press “-” key in Pic 5 , will show pic 6, and press twice “ENT” key , it will download MC board parameters into
diagnostic unit I plus. (“0-dn” , “dn” is the abbreviation of download). 
Page - 3 - of 8
 Pic 6
d. Press “-” in pic 6 to show Pic 7, and press twice “ENT” key will upload parameters from diagnostic unit to
main board and saved. If display color is dark ,it means don’t have valid parameters, and will not upload
parameters and save.
 Pic 7
 Download parameters (download parameters from main board to
diagnostic unit and save)
Change page to this interface, “0-DN’, DN is for download, and press twice “ENT” key, will download
parameters as below pictures.
When downloading, the number 3. 4 digit dot on the bottom right is blinking.
If finish parameter download, will display “SUCC” , it means to save parameters successful. 
Page - 4 - of 8
 Parameters upload. (upload parameters from diagnostic unit to main
board and save) -Must be in the inspection state
Change page to this interface, “0-UP”, it means upload, press twice “ENT” key, and will upload parameters
from diagnostic unit to main board as below pictures.
When uploading, the number 3. 4 digit dot on the bottom right is blinking
Display “SAVE ”, it means the parameters has been received successfully, and main board is saving parameters.
Please don’t touch the communication cable and diagnostic unit at this time.
It will display “SUCC” when parameters is uploaded and saved successfully. At the same time, please power off
main power supply and restart elevator main board.
 Supplementary explanation about upload and download from main
board. 
Page - 5 - of 8
If shows “E-XX” , it means the relative operation is error, Please check the main board status, communication
cable etc…
Explanations of Error codes :
E—10 error from downloading data
E—11 error from downloading data timeout
E—12 An error occurred while downloading data and fail to save.
E—00 invalid uploaded data
E—01 error from uploading data
E—02 error from uploading data timeout
E—03 version error while uploading data
E—04 error from uploading data, please restart main board
E—05 error from saving codes while uploading data.
E—06 error from saving operation while uploading data
E—20 unknown error
 Backup characteristic program to computer
 Restore characteristic program to diagnostic unit
 The code meaning when copy parameters from diagnostic unit.
Software Operations:
1. upload file from computer to diagnostic unit
1
2. open serial
port
3. select needed
spec upload to
diagnostic unit
4. select to save
specs
1. select COM
port
5. click to upload
specs to diagnostic
unit
6. uploaded spec to diagnostic
unit, successfully 
Page - 6 - of 8
2. download spec from diagnostic unit to computer
3.Illustration for spec modification
2. Input your modified spec address
and click enter to save, and select
it, the value for this address will be
changed automatically. Click”
modify” button, will show the
modified value.
3. click save to
take effect.
upline is original
value
downline is
modified value
1. upload or open the spec file, click
“spec” in menu, and select “spec modify”
1. select COM
port
2. open
serial port
3. select program Number for
needed backup to computer
4. click to download
spec
5、download spec successfully
6. click to save,
and select the
saved route.
Done. 
Page - 7 - of 8
4、data cable connection
5. the accessories for connector changes from USB to RS232 serial port.
this connector is only
for diagnostic unit,
forbid connecting with
USB of computer.
The short-line USB
connector, is 5V power
supply, when diagnostic unit
needs 5V power supply, it can
connect computer USB ,
mobile phone charges or
power charger. The short-line
USB connector is only for
power supply
9-pin RS232 serial
port is for the
connection with board
port of elevator’s MC
board or RS232 of
computer.
2 – RXD
3 – TXD
5 – GND
9 – 5V DC 
Page - 8 - of 8
Note: when diagnostic unit connects with computer, if computer is not with RS232 serial connector, will need this
accessories.
6. Distinguish
RS232 


下載文件:點擊下載Diagnostic unit I plus User Manual_3-E (查看下載口令
    下載說明:(1)倍加信科技提供的Diagnostic unit I plus User Manual_3-E資源僅供下載學習和參考,如果使用下載的Diagnostic unit I plus User Manual_3-E資料造成任何損失與倍加信科技無關,Diagnostic unit I plus User Manual_3-E資料最終以廠家提供原廠資料為準。(2)倍加信科技提供的Diagnostic unit I plus User Manual_3-E資料都來自網絡,并免費提供下載Diagnostic unit I plus User Manual_3-E不收取任何費用,若發現您的權益受到侵害,請聯系我們客服,我們會立即刪除Diagnostic unit I plus User Manual_3-E。(3)倍加信科技免費提供大量蒂森電梯技術資料下載,點擊【頂部電腦官網按鈕】查看更多信息,倍加信科技提供了大量相關資料下載。(3)倍加信語音梯控、人臉識別梯控、二維碼梯控、IC刷卡梯控、CPU梯控、ID卡梯控、T5577卡梯控、證件乘梯、指紋識別梯控、掌靜脈梯控、手機乘梯、機器人乘梯等廣泛應用于蒂森電梯,歡迎聯系客服咨詢了解,再次感謝您蒞臨倍加信科技下載蒂森電梯Diagnostic unit I plus User Manual_3-E。

主站蜘蛛池模板: 国产精品久久久久久久免费看| 末成年女a∨片一区二区| 夜夜春夜夜爽| 亚洲成色在线综合网站免费| 男人的天堂av社区在线| 精品国产一区二区三区免费| 人人妻人人澡人人爽欧美一区双| 婷婷久久综合九色综合绿巨人| 草草影院ccyy国产日本欧美| 加勒比无码一区二区三区| 精品久久久久久国产| 国产精品h片在线播放| 亚洲处破女av日韩精品| 中文字幕av一区中文字幕天堂| 亚洲无亚洲人成网站77777| 日本不卡三区| 国产午夜成人久久无码一区二区| 全免费a敌肛交毛片免费| 亚洲av综合色区无码二区爱av | 亚洲日韩av一区二区三区中文| 成人欧美一区二区三区| 久久亚洲av午夜福利精品一区| 狠狠噜狠狠狠狠丁香五月| 女人三a级毛片视频| 欧洲美女与动性zozozo| 精品无人区一区二区三区| mm1313亚洲国产精品| 亚洲国产一区二区三区| 欧美性大战久久久久久| 国产精品无码一本二本三本色| 久久久久亚洲av无码网站| 国产肉丝袜视频在线观看| 婷婷国产成人精品视频| 亚洲av不卡一区二区三区| 亚洲欧美成人一区二区三区| 野花视频官网| 亚洲精品午夜久久久伊人| 中国老妇xxxx性开放| 亚洲av无码男人的天堂在线| 精品人妻无码一区二区色欲产成人| 亚洲色偷拍另类无码专区|