A3120V_icpdf
A3120V_icpdf
2.0 Amp Output Current IGBT Gate Drive Optocoupler
Technical Data HCPL-3120 HCPL-J312 HCNW3120 Features • 2.0 A Minimum Peak Output Current • 15 kV/μs Minimum Common Mode Rejection (CMR) at VCM = 1500 V • 0.5 V Maximum Low Level Output Voltage (VOL) Eliminates Need for Negative Gate Drive • ICC = 5 mA Maximum Supply Current • Under Voltage Lock-Out Protection (UVLO) with Hysteresis • Wide Operating VCC Range: 15 to 30 Volts • 500 ns Maximum Switching Speeds • Industrial Temperature Range: -40°C to 100°C • Safety Approval UL Recognized 2500 Vrms for 1 min. for HCPL-3120 3750 Vrms for 1 min. for HCPL-J312 5000 Vrms for 1 min. for HCNW3120 CSA Approval VDE 0884 Approved VIORM = 630 Vpeak for HCPL-3120 (Option 060) VIORM = 891 Vpeak for HCPL-J312 VIORM = 1414 Vpeak for HCNW3120 BSI Certified (HCNW3120 only) (Pending) Applications • IGBT/MOSFET Gate Drive • AC/Brushless DC Motor Drives • Industrial Inverters • Switch Mode Power Supplies A 0.1 μF bypass capacitor must be connected between pins 5 and 8. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Functional Diagram TRUTH TABLE VCC - VEE VCC - VEE “POSITIVE GOING” “NEGATIVE GOING” LED (i.e., TURN-ON) (i.e., TURN-OFF) VO OFF 0 - 30 V 0 - 30 V LOW ON 0 - 11 V 0 - 9.5 V LOW ON 11 - 13.5 V 9.5 - 12 V TRANSITION ON 13.5 - 30 V 12 - 30 V HIGH 1 3 SHIELD 2 4 8 6 7 5 N/C CATHODE ANODE N/C VCC VO VO VEE 1 3 SHIELD 2 4 8 6 7 5 N/C CATHODE ANODE N/C VCC N/C VO VEE HCPL-3120/J312 HCNW3120 2 Description The HCPL-3120 contains a GaAsP LED while the HCPL-J312 and the HCNW3120 contain an AlGaAs LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by these optocouplers make them ideally suited for directly driving IGBTs with ratings up to 1200 V/100 A. For IGBTs with higher ratings, the HCPL-3120 series can be used to drive a discrete power stage which drives the IGBT gate. The HCNW3120 has the highest insulation voltage of VIORM = 1414 Vpeak in the VDE0884. The HCPL-J312 has an insulation voltage of VIORM = 891 Vpeak and the VIORM = 630 Vpeak is also available with the HCPL-3120 (Option 060).
- 上一篇:ACD2電梯故障代碼 2021/4/19
- 下一篇:1200SX-EN電氣圖(E12) 2021/4/19